Guide to Bandsaw Safety

wood workshop

Stories of how one lost their fingers in the woodworking workshops are familiar. Trips to the emergency room are reported to be many as well. No one wishes accidents on themselves, but the above can be avoided if those in the wood business keep safety in mind. Any machine with a blade and operating at high speed is dangerous. This article will give you safety measures to be observed when using a bandsaw. People perish due to lack of knowledge; you might have been experiencing numerous accidents in your workshop because you are not informed on safety measures.

Other than observing the tips below, you need to purchase quality bandsaw. Research and ask around before purchasing a bandsaw. You can check for excellent 14 inch budget bandsaw reviews. It is among the best in the market.  Read on.

Wheel Covers

wood working, wood tableAs the name suggests, the wheel covers are supposed to hide the wheels inside the frame. The wheels turn at high speed. Chances of accidents are reduced when the wheels are covered. With the covers, you will be required to open and change the blade. This is the only price you are going to pay for your safety.

Blade Guard

Blade guard protects your fingers against the spinning bandsaw blade. All blades should be kept in their place to prevent slippage or kickbacks. You should be careful when handling your stock because even an artisan’s hands slip on the bandsaw table.

Blade Tension

You should keep an eye on your blade tension all through. You might be switching to a harder wood, or the blade has been idle for some time. Check to ensure that it is tough but not too tight. A too tight blade might break while a loose one might slip off the wheels. Always check the tension of your saw before use.

How to Use the Bandsaw Safely

Check Your Machine Before Use

wood, carpenterNo matter how well machines are maintained, they wear out after some time. General maintenance will help it last longer, but you should keep on checking on the machine from time to time. For a bandsaw, you should keep on checking the wheels, frames and any other moving part that experience tear and wear. Always listen to your machine because even the hardest frames can crack.

Any weird or strange sounds means something is wrong. It might be hard if you are a starter, but after you have gotten used to the way it functions, you will be able to notice even the slightest change. A click is among the worst sounds you could hear from a bandsaw. Shut off your machine and move away immediately you hear a clicking sound. It could mean other things, but it usually means that the blade is cracking and could snap anytime.

Handling the Stock

Be cautious when handling the wood. Make sure that the wood is placed on a flat table when handling it. When you are doing the cutting, adjust the table, not the stock. Pull any long boards out from the back and keep your hands on the sides when pushing wood into the blade.

 …

Continue Reading